Triton MAKO 2000 Operation Manual - Manual (Page 180)

S
ECTION
8 - E
RROR
R
ECOVERY
8-2
T
RITON
S
YSTEMS
, I
NC
.
M AKO C ASH D ISPENSER O PERATION M ANUAL
I
NTRODUCTION
The Mako Dispenser operating system determines the operational status of each of its components
by routinely performing a system status check. A status check is performed:
1.) During power up.
2.) Once every forty seconds while the dispenser is not in use.
3.) Before leaving the Management Functions main menu screen.
4.) After every transaction.
An error detected during a status check will place the dispenser in an “OUT OF SERVICE” mode
of operation and display the messages shown in Figure 8-1 on the LCD display screen.
E
RROR
R
ECOVERY
Many error conditions require the assistance of a qualified service technician to return the dis-
penser to normal operation. But there are some actions that the end user can perform to confirm the
existence of a problem or correct simple problems.
Table 8-1, Error Recovery Procedures, provides a list of error conditions that can cause the dis-
penser to enter an “OUT OF SERVICE” condition. The table lists the error codes, a description of
each error message and possible corrective actions non-service personnel can perform in an at-
tempt to return the unit to normal operation.
Many of the procedures direct you to RESET the dispenser as the first step. This action may be all
that is necessary to clear the error indication. In other cases further actions may be necessary. If
necessary, you will be directed to contact your service organization.
Figure 8-1. The “Out of Service“ display.