Work Sharp WS2000 Tool Sharpener & Grinder Step By Step Guide - Manual (Page 14)

Before
WORK SHARP
After
WORK SHARP
Pry Bars
Objective:
Create a well-functioning pry bar with the
following feature:
4 A clean beveled edge so you can get
underneath or between objects.
4 The edge of the bar should not be too
thin so that it remains strong.
Where to Sharpen:
4 Top Side Sharpening Area
Abrasive Selection:
4 Coarse solid abrasive (P60 – P80 grit)
Top Tips:
Grind a steep bevel angle onto the pry bar
for strongest edge.
Using the Top Tool Rest will help regrind
the bevel.
Go from this...
...to this!