Work Sharp WS2000 Tool Sharpener & Grinder Step By Step Guide - Manual (Page 21)

Method:
• Place the fine slotted abrasive face
down on your machine.
• Bring bolt into Edge-Vision™ Port
and gently contact the wheel and roll
material so that the lead thread has
been beveled and no burr remains.
• Test the threads with a nut and re-
bevel if necessary.
1
2
3
Testing threads with a nut
Bolt in Edge-Vision ™ Port
Fine slotted Edge-Vision ™ abrasive
(P180–P320 grit)