Work Sharp WS2000 Tool Sharpener & Grinder Step By Step Guide - Manual (Page 24)

Before
WORK SHARP
After
WORK SHARP
Lawnmower Blades
Objective:
Objective: Create a sharp lawnmower blade
with the following features
:
4 No nicks or dents at the cutting edge
4 A sharp single bevel edge on both ends
of the blade. Note: The exact angle of the
edge is not critical to cutting performance.
Where to Sharpen:
4 Top Side Sharpening Area
Abrasive Selection:
4 Coarse solid abrasive (P60 – P80 Grit)
Top Tips:
Flat lawnmower blades can easily be
sharpened on your Work Sharp.
Use the coarse solid abrasive for fastest
results on damaged blades
Some curved or mulching style blades
cannot be fully sharpened on Work Sharp
due to their shape. In this case, you have
two options:
• Take the blade to a professional for
complete sharpening.
• Use the Work Sharp to sharpen as much
of the blade as possible. This may be
enough to make it cut more efficiently.
Go from this...
...to this!