Work Sharp WS2000 Tool Sharpener & Grinder Step By Step Guide - Manual (Page 28)

Before
WORK SHARP
After
WORK SHARP
Shovels, Hoes
& Trowels
Objective:
Create a shovel with the following features:
4 No dents or damage on shovel’s cutting
edge
4 Creating a sharp new single bevel edge
(The exact angle of the edge is not
critical.)
Where to Sharpen:
4 Top Side Sharpening Area
Abrasive Selection:
4 Coarse solid abrasive
(P60 – P80 grit)
Top Tips:
Hose off shovel before sharpening to
reduce dirt, debris and dust.
Hold shovel firmly with both hands to
insure safety.
Remove Top Tool Rest to increase working
area.
Due to shovel shape, a freehand method
will yield best results.
Go from this...
...to this!