Work Sharp WS2000 Tool Sharpener & Grinder Step By Step Guide - Manual (Page 17)

Method:
• Place the fine slotted abrasive face
down on your machine.
• Flatten both sides of the screwdriver
face in the Edge-Vision™ Port.
• If you need to re-establish the flat
tip, grind the tip square using the top
side of the grinding wheel near the
center.
1
2
3
Square the tip on top side of wheel
Fine slotted abrasive
Flatten both sides
in Edge-Vision™ Port
Fine slotted abrasive (P180–P320 grit)