Work Sharp WS2000 Tool Sharpener & Grinder Step By Step Guide - Manual (Page 27)

Method:
• Place the coarse grit solid abrasive
face up on your machine and adjust
the Top Tool Rest to the low position.
• Firmly hold the axe with both hands
and position the axe head onto the
Tool Rest.
• Lay the cutting edge onto the
abrasive disk and roll the axe from
side to side to contact the entire
cutting edge.
• Remove axe and inspect area being
ground. Reposition tool on Top Tool
Rest and re-grind as needed.
• Continue to sharpen until desired
finish and sharpness is attained.
• Flip the axe and sharpen the same
bevel on the other side.
1
2
3
Axe on Top Tool Rest (other side)
Coarse solid abrasive
Axe on Top Tool Rest
Coarse solid abrasive (P60–P80 grit)
4
5
6