AT&T TL86109 - Manual (Page 126)

120
Answering system
Message playback
If you have new messages, the telephone plays only the new messages
(oldest first). If there are no new messages, the telephone plays all messages
(oldest first). If you have no messages, the cordless handset or telephone
base announces, “You have no message.“ and displays
You have: No message.
When playback begins, you hear the total number of messages followed by
the date and time of the message (see
Set date/time on pages 37 and 47
for setting day and time). After the last message, the telephone announces,
“End of messages.”
and the cordless handset or telephone base displays
End of messages. If the recording time is less than three minutes, you hear,
“Less than three minutes to record.“ (see
Message capacity on page 118)
To listen to messages with a cordless handset:
Press the MENU softkey in idle mode.
Press the SELECT softkey to select PLAY MESSAGES.
Press or to select Mailbox 1 or Mailbox 2, then press the
SELECT softkey.
If there are new and old messages, press
or to select Play new msgs
or Play old msgs and then press the SELECT softkey.
Options during playback:
Press EQ button to adjust the message playback audio quality.
Press /VOL or VOL/ to adjust the speakerphone volume.
Press the SKIP softkey to skip to the next message.
Press the REPEAT softkey to repeat the message currently playing.
Press the REPEAT softkey twice to listen to the previous message.
Press 3 to delete the current message. The system advances to the
next message.
Press
OFF/
CLEAR
to stop.
1.
2.
3.
4.
•
•
•
•
•
•