Website, Home area code, Telephone base settings – AT&T TL86109 User Manual
Page 55
49
Telephone settings
Telephone base settings
Website
You can use this feature to view the AT&T website address for product
support or accessory purchasing.
Press the
MENU softkey on the telephone base in idle
mode to enter the main menu.
Press
DIR, CID
,
/DELETE or /REC to scroll to
Website, then press the SELECT softkey. The telephone
base screen shows the AT&T website address.
Press the
OK softkey to exit.
Home area code
If you dial seven digits to make a local call (area code not required), enter
your area code
into the telephone as the home area code. When you receive
a call from within your home area code, the caller ID history only displays the
seven digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID history. If
you dial 10 digits to make a local phone call, do not use this home area code
feature. If you do, you cannot place local calls from your caller ID history, as
they will have only seven digits.
To set the home area code:
Press the
MENU softkey on the telephone base in idle
mode to enter the main menu.
Press
DIR, CID
,
/DELETE or /REC to highlight
Directory, then press the SELECT softkey.
Press the
SELECT softkey to choose Home.
Press
DIR, CID
,
/DELETE or /REC to highlight
Home area code, then press the SELECT softkey.
Use the dialing keys to enter the desired home
area code.
Press
CANCEL
to erase a digit.
Press
DIR
or
/SKIP to move the cursor to the
right. Press
CID or
/
REPEAT
to move to the left.
Press the
SET softkey to confirm. You hear a
confirmation tone.
NOTE: If, in the future, your telephone service provider requires you to dial 10 digits
to make a local call (area code + telephone number), or, if you move to a location that
requires it, delete your home area code you have already programmed following the steps
above. After you have deleted the home area code,
_ _ _ appears in the display.
1.
2.
3.
1.
2.
3.
4.
5.
•
•
6.
www.telephones
.att.com
OK
Page all handsets
Ringers
Settings
Website
SELECT
Play messages
Answering sys
Directory
Call log
SELECT
HOME
Review
Add contact
Home area code
SELECT
HOME AREA CODE
On
---
SET
DIRECTORY
Home
Cell phone A
Cell phone B
SELECT