AT&T TL86109 - Manual (Page 93)

87
Multiple handset use
Intercom
To answer an intercom at the destination handset:
Press 1 LINE/
FLASH
, 2 LINE/
FLASH
or /SPEAKER. Both screens
show Intercom.
To silence an intercom call:
Press the SILENCE softkey on the destination handset. Its screen displays
Ringer muted for a few seconds.
To mute while on an intercom call:
Press the MUTE softkey on the handset or telephone base. Its screen
displays Microphone off for a few seconds.
To end an intercom call at the destination handset:
Press OFF/
CLEAR
or the END softkey, or place the cordless handset
back in the charger. Both screens display Intercom ended.
To end an intercom call at the telephone base:
Press the END softkey or return the corded handset to the telephone base.
Both screens display Intercom ended.
NOTES:
You can cancel the intercom call before it is answered by pressing CANCEL on the
telephone base.
If the destination handset does not answer the intercom call within 100 seconds, is in
the directory or call log, or is out of range, the telephone base displays
Unable to call.
Try again and returns to idle mode.
You can use a maximum of five handsets at a time. For example, when four handsets
are used on intercom calls, use another handset for an outside call. When two handsets
are used on an intercom call, you can use three other handsets for an outside call.
To answer a line 1 or line 2 call during an intercom call:
When you receive an incoming call on line 1 or line 2 during an intercom call,
there is an alert tone.
Line 1 Incoming call or Line 2 Incoming call appears
on screens and 1 LINE/
FLASH
or 2 LINE/
FLASH
flashes. The telephone rings.
Using a cordless handset:
Press 1 LINE/
FLASH
or 2 LINE/
FLASH
to answer the corresponding call and
the intercom call ends automatically.
Press
OFF/
CLEAR
or the END softkey to end the intercom call without
answering the incoming call. The telephone continues to ring.
•
•
•
•
•
•
•
•
•
•