AT&T TL86109 - Manual (Page 83)

77
Telephone operation
Options while on calls
Hold
You can place any call on hold. You hear an alert tone
if you have not taken the call off of hold after 14
minutes. You hear another alert tone 30 seconds later.
At 15 minutes on hold, the call on hold automatically
disconnects.
To place a line 1 or line 2 call on hold:
Press HOLD on the handset or telephone base.
L1) ON HOLD or L2) ON HOLD appears on the
handset and telephone base. The corresponding
line buttons on the handset and telephone base
flash.
To resume a line 1 or line 2 call on hold:
Press the corresponding line button;
1 LINE/
FLASH
or 2 LINE/
FLASH
on the handset,
or 1 LINE or 2 LINE on the telephone base.
To place a cell call on hold:
Press HOLD on the handset or telephone base.
CL) ON HOLD appears on the handset and
telephone base.
CELL on the handset and
CELLULAR on the telephone base flash.
To resume a cell call on hold:
Press CELL on the handset or CELLULAR on the telephone base.
Equalizer
The equalizer feature on the handset enables you to change the quality of
the handset audio to best suit your hearing.
While on a call, or listening to a message or announcement,
press
EQ to select the equalizer setting Treble 1,
Treble 2, Bass or Natural (the default setting) for the
handset. The current setting is shown on the handset for
two seconds.
NOTES:
The equalizer feature does not apply to the telephone base or the
connected Bluetooth headset.
If you switch the call between the handset and speakerphone by pressing
/SPEAKER,
the audio setting remains unchanged.
The current equalizer setting remains unchanged until a new setting is selected.
•
•
•
•
•
•
•