AT&T TL86109 - Manual (Page 33)

27
Bluetooth
Bluetooth setup
Change PIN
You are required to enter a PIN when establishing a Bluetooth connection.
The default PIN of your telephone base is
0000.
To change the PIN:
Press the MENU softkey on the telephone base in idle
mode to enter the main menu.
Press
DIR, CID , /DELETE or /REC to highlight
Bluetooth, then press the SELECT softkey.
Press
DIR, CID , /DELETE or /REC to highlight
Change PIN, then press the SELECT softkey. The
telephone base displays
ENTER NEW PIN and the
existing PIN.
Use the dialing keys to enter a new four-digit code.
Press CANCEL to erase a digit.
Press DIR or /SKIP to move the cursor to the right. Press CID or
/ REPEAT to move to the left.
Press the SET softkey to save.
1.
2.
3.
4.
•
•
5.
ENTER NEW PIN
0000
SET
BLUETOOTH
Active devices
Paired devices
Change PIN
SELECT