AT&T TL86109 - Manual (Page 47)

41
Telephone settings
Telephone base settings
Ringer volume
You can select the ringer volume for incoming calls on line 1 or line 2 and
the cell line.
To adjust the telephone base ringer volume:
Press the MENU softkey on the telephone base in idle
mode to enter the main menu.
Press
DIR, CID , /DELETE or /REC to highlight
Ringers, then press the SELECT softkey.
Press the
SELECT softkey to choose Ringer volume.
Press DIR, CID , /DELETE or /REC to select
All lines, Line 1, Line 2, Cell A or Cell B, then press the
SELECT softkey to confirm.
Press
DIR, CID , /DELETE or /REC to adjust the
ringer volume. A sample of each ringer volume plays as
you scroll through the choices.
-OR-
Press the
OFF softkey to turn off the ringer. The telephone base displays
Ringer mute.
Press the SET softkey to confirm. You hear a confirmation tone.
-OR-
Press VOLUME to set the ringer volume
while the telephone base is in idle mode to
set the ringer volume for all lines.
Press the
SET softkey to confirm and you hear
a confirmation tone.
-OR-
Press the
OFF softkey to silence the
ringer volume.
NOTES:
Changing the telephone base ringer volume does not affect the handset ringer volume.
For more information on handset ringer volume, see page 31.
When the ringer volume of line 1 or line 2 is set to off, the telephone base displays
Ringer off for the corresponding line. When the ringer volume of Cell A or Cell B is set
to off, the telephone base displays
Ringer A off or Ringer B off respectively. When the
ringer volume of all cell calls is set to off, the telephone base displays Ringers off.
1.
2.
3.
4.
5.
6.
1.
2.
•
•
RINGERS
Ringer volume
Ringer tone
SELECT
RINGER VOLUME
All lines
Line 1
Line 2
SELECT
RINGER VOLUME
Phone memory
OFF SET