AT&T TL86109 - Manual (Page 23)

17
Bluetooth
Bluetooth setup
The telephone base then displays Connect cell to
base? Press the YES softkey to connect your cell
phone to the telephone base. For certain cell phones,
you may also need to press a key on your cell phone
to confirm the connection. The telephone base displays
Device connected to the base. The corresponding
status icon (
A or B) displays. The corresponding
device light on the telephone base ( DEVICE A or
DEVICE B) turns on.
If you already have two devices on the active devices list, the
telephone base screen displays Max. connectable devices is two and
you are prompted to replace an existing device on the active devices
list (page 24).
NOTES:
The pairing process may take up to one minute. If the pairing process fails, try again.
If your Bluetooth device fails to connect with the telephone base, the telephone
base displays
Connection failed and then Auto-connect function enabled. Press the
SELECT softkey and the telephone base will then periodically attempt to connect with
your Bluetooth device.
8.
•
•
•
Connect cell
to base?
YES NO
Device
connected
to the base