AT&T Partner II - Manual (Page 147)

■
■
■
The facility interface code, which is O2LS2.
■
You must also notify your local telephone company if and when this
equipment is permanently disconnected from the line(s).
Repair Instructions: If you experience trouble because your equipment
is malfunctioning, the FCC requires that you disconnect the equipment
from the network and not use it until the problem has been corrected.
Repairs to this equipment can only be made by the manufacturer, its
authorized agents, or by others who may be authorized by the FCC. In
the event repairs are needed on this equipment, please contact the AT&T
National Service Assistance Center (NSAC) at 1 800 628-2888. For
warranty information, see Appendix C.
Rights of the Local Telephone Company: If this equipment causes
harm to the telephone network, the local telephone company may
discontinue your service temporarily. If possible, they will notify you in
advance. But if advance notice is not practical, you will be notified as
soon as possible. You will also be advised of your right to file a complaint
with the FCC.
Your local telephone company may make changes in its facilities,
equipment, operations, or procedures that affect the proper
functioning of this equipment. If they do, you will be notified in
advance to give you an opportunity to maintain uninterrupted
telephone service.
Hearing Aid Compatibility: The custom telephones for this system are
compatible with inductively coupled hearing aids as prescribed by the
FCC.
E-2 FCC Information