AT&T Partner II - Manual (Page 165)

SYSTEM RESET – PROGRAMMlNG SAVED (p. 5-10)
IMPORTANT: Using this procedure disconnects any active calls but
retains equipment settings. Use it only if the equipment fails to function
correctly after a power failure or down period.
DIAL #728
Dialing Restrictions and Permissions
Groups Auxiliary Equipment
OUTGOING CALL RESTRICTION
(p 5-12)
DIAL #401
DIAL an extension jack number
(10–33)
DIAL 1 = No Restriction ✔
2 = Inside Only
3 = Local (inside and
local) Only
PRESS [ Next Item ] to select another
extension
TOLL CALL PREFIX (p. 5-12)
DIAL #402
DIAL
1 = 0/1 plus Area Code and
Number ✔
2 = Area Code and Number
Only
SYSTEM PASSWORD (p. 5-12)
DIAL #403
DIAL 4 digits to set the password
DISALLOWED PHONE NUMBER
LISTS (p. 5-12)
DIAL #404
DIAL a list number (1–4)
DIAL a list entry (01–10)
To add entry:
DIAL the phone number (up to 12
digits)
PRESS [ Enter ]
PRESS [ Remove ] to remove a list entry
PRESS [ Next Item ] to select another list
entry
DOORPHONE 2 EXTENSION (p. 5-13)
DIAL #605
DIAL an extension jack number
(12–15, 18–20, 24–27, or 30–33)
To program another list:
PRESS [
Next Procedure ] [ Prev Procedure ],
enter a new list number, and
repeat above steps
DISALLOWED LlST ASSlGNMENTS
(p. 5-12)
DIAL #405
DIAL an extension jack number
(10–33)
DIAL a list number (1–4)
DIAL
1 = Assigned
2 = Not Assigned
✔
PRESS [ Next Item ] to program another
list
To program another extension:
PRESS [
Next Procedure ] [ Prev Procedure ],
enter a new extension jack
number, and repeat above
steps
DIAL #608
DIAL
1 = All calls ✔
2 = Outgoing calls only
✔
= Factory Setting
EMERGENCY PHONE NUMBER
LIST (p. 5-12)
DIAL #406
DIAL a list entry (01-10)
To add entry:
DIAL the telephone number (up to
12 digits)
PRESS [ Enter ]
PRESS [ Remove ] to remove a list entry
PRESS [ Next Item ] to program another
list entry
ALLOWED PHONE NUMBER
LISTS (p. 5-12)
DIAL #407
DIAL a list number (1–4)
DIAL a list entry (01-10)
To add entry:
DIAL the telephone number (up to
12 digits)
PRESS [ Enter ]
PRESS [ Remove ] to remove a list entry
PRESS [_ Next Item ] to select another Iist
entry
To program another list:
PRESS [ Next Procedure ] [ Prev Procedure ],
enter a new list number, and
repeat above steps
ALLOWED LIST ASSIGNMENTS
(p. 5-12)
DIAL #408
DIAL an extension jack number
(10–33)
DIAL a list number (1–4)
DIAL
1 = Assigned
2 = Not Assigned
✔
PRESS [ Next Item ] to select another list
To program another extension:
PRESS [
Next Procedure ] [ Prev Procedure ],
enter a extension jack number,
and repeat above steps
PICKUP GROUP EXTENSIONS
(p. 5-13)
DIAL #501
DIAL a group number (1–4)
DIAL an extension jack number
(10–33)
DIAL 1 = Assigned to group
2 = Not assigned to group
✔
PRESS [ Next Item ] to select another
extension
CALLING GROUP EXTENSIONS
(p. 5-13)
DIAL #502
DIAL a group number (1–4)
DIAL an extension jack number
(10–33)
DIAL 1 = Assigned to group
2 = Not assigned to group ✔
PRESS [ Next Item ] to select another
extension
NIGHT SERVICE BUTTON (p. 5-13)
DIAL #503
DIAL
1 = Assigned to ext jack 10
2 = Not assigned ✔
3 = Select button and then
press a programmable
button
If you use Option 3 after a
Night Service button has been
assigned, the Night Service
button moves from the old
button to the new button you
select
NIGHT SERVICE GROUP
EXTENSIONS (p. 5-13)
DIAL #504
DIAL an extension jack number
(10–33)
DIAL 1 = Assigned to group
2 = Not assigned to group
✔
PRESS [ Next Item ] to select another
extension
HUNT GROUP EXTENSIONS
(p. 5-13)
DIAL #505
DIAL a group number (1–6)
DIAL an extension jack number
(10–33)
DIAL 1 = Assigned to group
2 = Not assigned to group
✔
PRESS [ Next Item ] to select another
extension
NOTE: This feature is not recom-
mended for most systems. If
Centrex Hunt Groups are avail-
able, use them instead.
FAX MACHINE EXTENSIONS
(p. 5-13)
DIAL #601
DIAL an extension jack number
(10–33)
DIAL 1 = Assigned
2 = Not Assigned
✔
PRESS [ Next Item ] to select another
extension
MUSIC ON HOLD (p. 5-13)
DIAL #602
DIAL
1 = Active ✔
2 = Not Active
HOTLINE (p. 5-13)
DIAL #603
DIAL the Hotline extension jack
number (10–33)
DIAL the alert extenson jack
number (10–33, or 70 for a
loudspeaker paging system;
not the Hotline)
To remove the Hotline and alert:
PRESS [
Remove ]
DOORPHONE 1 EXTENSION (p. 5-13)
DIAL an extension jack number
(12–15, 18–21, 24–27, or 30–33)
DOORPHONE ALERT EXTENSIONS
(p. 5-13)
DIAL #606
DIAL an extension jack number
(10–33; not a doorphone
extension)
DIAL 1 = Not an alert ✔
2 = Doorphone 1 alert
3 = Doorphone 2 alert
4 = Doors 1 and 2
PRESS [ Next Item ] to select another
extension (up to 5 alert
extensions per doorphone)
SMDR RECORD TYPE (p. 5-13)
SMDR TOP OF PAGE (p. 5-13)
DIAL #609