AT&T Partner II - Manual (Page 88)

LINES EXTENSIONS
DIAL MODE
Identifies individual lines as touch-
tone or rotary. You may also need to adjust
the Rotary Dialing Timeout (#108).
DIAL #201
DIAL a line jack number
1 = Touch-Tone ✔
2 = Rotary
PRESS [ Next Item ] to program another line
HOLD DlSCONNECT TIME
Selects the signal that the equipment
controller uses to detect when a caller on
hold hangs up. Change the setting to
“long” if the equipment controller discon-
nects callers on hold before they hang up,
or to “short” if users get dial tone when
trying to retrieve calls left on hold.
DIAL #203
DIAL a line jack number
1 = Long (450 msec) ✔
2 = Short (50 msec)
PRESS [ Next Item ] to program another line
DIAL
DIAL
✔
= Factory Setting
= Troubleshooting procedure
(see Appendix C)
LINE ASSIGNMENT DISPLAY LANGUAGE
Assigns the Centrex lines that are available Identifies the language used for display
at an extension, in consecutive order. The messages if the specified extension has
default order of line assignment is from left an MLS-34D or MLS-12D phone.
to right, starting with the bottom row of line
buttons on an MLS- or MLC-model phone.
DIAL #303
To put the lines in a different order, first use DIAL an extension jack number
this procedure to remove all assigned lines; 1 = English ✔
then assign lines in the desired order.
DIAL
2 = Spanish
DIAL #301 3 = French
DIAL an extension jack number PRESS [ Next Item ] to program another
extension
A red LED lights next to each line
button that has a line assigned.
To remove all existing line assign-
ments, press [
Remove ] before
selecting a line.
DIAL a line jack number (01 to 24)
If that line is currently assigned, a
green LED will light next to the button
it is assigned to.
1 = Assigned
2 = Not Assigned
3 = Select Button and then press
a line button to assign the line
to that button
If you use option 3 after a line has been
assigned, the line moves from the old
button to the new button you select.
PRESS [ Next Item ] to program another line for
this extension
To program another extension:
PRESS [ Next Procedure ] [ Prev Procedure ], enter a
new extension jack number, and
repeat above steps
NOTE: Use the Line Ringing procedure
(page 5-15) to identify when each line
should start ringing at an extension. See
page 3-3 for information on default line
assignments.
LINE ACCESS RESTRlCTION
DIAL
Restricts calling on specified lines at the
specified extension.
AUTOMATIC EXTENSION PRIVACY
Prevents other extensions with the same
line from joining a call on the specified
extension. You can also use this proce-
dure to prevent users from interrupting
calls on an extension with a fax machine
or modem. Privacy can also be pro-
grammed on a button for manual use (see
page 5-16).
DIAL #304
DIAL an extension jack number
DIAL 1 = Assigned
2 = Not assigned
PRESS [ Next Item ] to program another
extension
ABBREVIATED RINGING
Determines how calls ring at an extension
when the extension is busy on a call on a
different line. If Abbreviated Ringing is on
and you are busy on a call, the call rings
once; the green button for the line
continues to flash until you answer the call
or the caller hangs up.
DIAL #305
DIAL an extension jack number
1 = Active (1 ring) ✔
2 = Not Active (repeated ringing)
PRESS [ Next Item ] to program another
DIAL #302
extension.
DIAL an extension jack number COPY SETTINGS
DIAL a line jack number Copies following settings from one
extension to another:
DIAL 1 = No Restriction ✔
2 = Outgoing Only #302 Line Access Restriction
3 = Incoming Only
#303 Display Language
4 = No Access (line appears on
button, but you can use line
#304 Automatic Extension Privacy
only to pick up a held call)
#305 Abbreviated Ringing
#401 Outgoing Call Restriction
PRESS [ Next Item ] to program another line #405 Disallowed List Assignments
To program another extension:
PRESS [
Next Procedure ] [ Prev Procedure ], enter a
new extension jack number, and
repeat above steps
#408 Allowed List Assignments
#501 Pickup Group Extensions
#502 Calling Group Extensions
#504 Night Service Group Extensions
#505 Hunt Group Extensions
#601 Fax Machine Extensions
DIAL #399
DIAL a source extension jack number
DIAL target extension jack numbers
Programming Reference 5-11