AT&T Partner II - Manual (Page 57)

Procedure Setting at
Extension
Jack 10
Setting for Covering
Extensions Setting for Covered Extensions
Abbreviated
Ringing
(#305)
Line
Ringing
Do Not
Disturb
([
Feature ]
[ 0 ] [ 1 ])
Privacy
([
Feature ]
[ 0 ] [ 7 ])
Set to “not
active” for an
extension if you
want incoming
calls to keep
ringing, even
when the user
at the
extension is
busy on
another call
(this setting
applies to all
lines assigned
at that
extension).
No change
required
No change
required
No change
required
Set to “not active” for an
extension if you want
incoming calls to keep
ringing, even when the user
at the extension is busy on
another call (this setting
applies to all lines assigned
at that extension).
To pick up calls on
secondary lines only when
there is no answer on the
covered lines, set ringing
for secondary lines to
“delayed ring.” To answer
all calls, set ringing for
secondary lines to
“immediate ring.”
Alternatively, use
Button-Down Mode (#723)
to set secondary lines (at all
system extensions) to “no
ring;” this setting means
that when a call comes in
on a secondary line, the
lights next to the line button
flash, but the call does not
ring. The user at the
covering extension must
press the line button to
answer the call.
No change required
No change required
No change required
If the user at the covering extension
should screen all calls, set the
primary line to “no ring” or “delayed
ring.”
Program on a lighted button (on an
MLS- or MLC-model phone only).
When the feature is on, calls do not
ring at the extension, but callers
hear ringing. (The lighted button
shows when Do Not Disturb is on.)
This option is only recommended
when all calls for an extension are
covered by a user at another
extension.
Program on a lighted button (on an
MLS- or MLC-model phone only) to
allow the person at the extension to
turn Privacy on and off. This allows
the person at the extension to
control when others who share a line
can join in on a call.
Customizing Your System 4-9