Thermo Fisher Scientific Alpha COND 560 - Manual (Page 31)

25
If Controller type was set to Off (OFF):
The controller reverts to Cntr screen.
If Controller type was set to On (L.Ct):
3
Select the relay status under Non-Alarm condition: The lower
display shows ‘rEL’. The upper display shows the last configured relay
status. (‘dEEn’ or ‘En’). Press
▲ or ▼ key to select the desired relay
status.
dEEn: De-energized
En: Energized
Press ENT key to confirm your selection. The controller reverts to
Cntr screen.
Press
▲ or ▼ key to access other setup screens or press ▲ and ▼ key
simultaneously (escape) to return to measurement mode.