Thermo Fisher Scientific Alpha COND 560 - Manual (Page 7)

1
1 I N T R O D U C T I O N
1.1 Before You Begin
Thank you for purchasing the Alpha COND 560 Controller.
The construction of the Alpha COND 560 Controller employs leading edge tech -
nology and complies with safety regulations currently in force. Notwithstanding this,
improper use could lead to hazards for the user or a third-party, and/or adverse
effects on the plant or other equipment. Therefore, the operating instructions must
be read and understood by the persons involved before working with the
Conductivity Controller.
The instruction manual must always be stored close at hand, in a place accessible
to all people working with the Conductivity Controller.
If you have questions, which are not or insufficiently answered in this instruction
manual, please contact your authorized supplier. They will be glad to assist you.
1.2 Intended Use
Alpha COND 560 Controllers are intended solely for Conductivity and temperature
measurement, as described in this instruction manual.
Any other use, or use not mentioned here, that is incompatible with the technical
specifications is deemed inappropriate. The operator is solely responsible for any
damage arising from such use.
Other prerequisites for appropriate use include:
– Comply with the instructions, notes and requirements set out in this instruction
manual.
– Comply with all local safety regulations concerning safety at work.
– Comply with all information and warnings in the documentation dealing with the
products used together with the Conductivity Controller (housing, sensors, etc.).
– Comply with the local environmental and operational conditions.