Thermo Fisher Scientific Alpha COND 560 User Manual
Page 8
2
1.3 Safety
Instructions
• The Alpha COND 560 Controller should be installed and
operated only by personnel familiar with the instrument and
who are qualified for such work.
• A defective Conductivity Controller must neither be installed
nor put into service.
• The Alpha COND 560 must only be operated under the
specified operating conditions (see section 6).
• The Alpha COND 560 must not be repaired by the
customer.
• No modifications to the Alpha COND 560 are allowed. The
manufacturer/supplier accepts no responsibility for damage
caused by unauthorized modifications. The risk is borne
entirely by the user.
1.4
Taking Out of Service / Correct Disposal of the Unit
Taking out of Service
•
First disconnect the unit from the power supply and then undo all electrical
connections.
•
Remove the unit from the wall.
Correct Disposal of the Instrument
When the Alpha COND 560 is permanently taken out of service, obey the local
environmental regulations for correct disposal or send the instrument to your local
distributor, they will take care of proper disposal.