Badger Meter Flow-Alert Reed Switch - Manual (Page 2)

Page 2 Form #04-VAM-UM-00229 09/12
I - INTRODUCTION
The Flow-Alert flow meter combines the rugged proven technology of a
direct reading, piston-type, variable area flow meter, coupled with electri-
cal contacts utilized to signal at selected flow rates. This combination is
sealed against industrial contamination by a NEMA 12 and 13 (IP52/54)
rated enclosure.
This product provides a local flow indication and automatically signals the
operator or PLC if flow is too high or too low.
Uses of the Flow-Alert flow meter include: bearing lubrication, case drain
verification, gun drill cooling, pump flow confirmation, etc.
FLOW-ALERT
FLOW SWITCH
6000 PSI / 414 BARS MAX
G
PM
LPM
OIL
FIGURE 1- Flow-AlERt Flow MEtER