Badger Meter Flow-Alert Reed Switch - Manual (Page 5)

Form #04-VAM-UM-00229 09/12 Page 5
III - INSTALLATION
CAUTION
Caution - This product should be
installed and serviced by techni-
cally qualified personnel trained in
maintaining industrial class flow
instrumentation and processing
equipment.
CAUTION
Caution - Read instructions thor-
oughly before installing the unit. If
you have any questions regarding
product installation or mainte-
nance, call your local supplier for
more information.
CAUTION
Caution - This meter may contain
residual amounts of test fluid at the
time of shipment. This fluid should
be removed prior to installation
as the fluid may be incompatible
or hazardous with some liquids or
gases. Failure to follow these
CAUTION
Caution - This standard meter is
unidirectional. Attempts to flow flu-
ids in the opposite direction of the
flow arrow will result in the meter
acting as a check valve, creating a
deadheading situation. If the differ-
ential pressure magnitude is great
enough, damage to the internal
parts of the meter will result.
WARNING
Warning - Disconnect electri-
cal power before opening wiring
enclosure. Failure to follow these
instructions could result in serious
personal injury or death and/or
damage to the equipment.
WARNING
Warning - All wiring should be
installed in accordance with the
National Electrical Code® and must
conform to any applicable state and
local codes. Failure to follow these
instructions could result in serious
personal injury or death and/or
damage to the equipment.
CAUTION
Caution - Air/gas meters are NOT
oxygen cleaned. Use with oxygen
may cause hazardous or explosive
conditions that may cause serious
personal injury and/or damage to
the equipment.