Dwyer TIC - Manual (Page 29)

28
Shooting
IR Camera Adjustment
*DuoVision Display modes
Thermal, Visual and DuoVision image display
This IR camera records visual images with its built-in digital camera.
You can capture a visual image as a reference to the thermal image.
1
Press the MENU/ENTER key.
2
Press the MENU/ENTER key then
press the UP or DOWN arrow on the
omni
selector to select the
[IR/Visible] menu.
3
IR/Visible Setup
•
Press the UP or DOWN arrow on
the omni selector to select an item
to change.
•
Press the LEFT or RIGHT arrow on
the omni selector to set the values.
4
Press UP or DOWN arrow on the omni selector to select
[Mode], and press LEFT or RIGHT to select a display mode,
then press MENU/ENTER key.
*TIC-10 is not equipped with a visual CCD camera and it doesn’t have
the DuoVision Display modes, so you won’t see the [IR/Visible] item in its
menu.