Dwyer TIC - Manual (Page 37)

36
Shooting
IR Camera Adjustment
Measurement range
Follow the below steps to change the measurement range.
1
Press the MENU/ENTER key.
2
Press UP or DOWN arrow on the
omni selector to select [Manual
Adj.], then press MENU/ENTER key.
3
Selecting measurement range for
different lens.
•
After selecting the [Range] field,
press UP and DOWN arrow on the
omni selector at the same time to
change the measurement range for
different lens( p.70).
4
After this operation, press the MENU/ENTER key to save the
changes or press the C key to go back to the upper menu
without saving.