Dwyer TIC - Manual (Page 35)

34
Shooting
IR Camera Adjustment
Image settings
1
Press the MENU/ENTER key.
2
Press the UP or DOWN arrow on
the omni selector to select the
[System Setup] menu, then
Press the MENU/ENTER key.
3 Press the UP or DOWN arrow on
the omni selector to select
[Camera Setup], then press the
MENU/ENTER key.
4
Set the Image Settings.
•
Press the UP or DOWN arrow on
the omni selector to select an item
to change.
•
Press the RIGHT or LEFT arrow on
the omni selector to set the values.
5
After this operation, press the MENU/ENTER key to save
changes, or press the C key to go back to the upper menu
without saving.