Dwyer TIC - Manual (Page 39)

38
Shooting
Fulfill the Analysis Function
Setting object/global settings
1
Press the MENU/ENTER key.
2
Press UP or DOWN arrow on the
omni
selector to select
[Analysis], then press the
MENU/ENTER key.
3
Press UP or DOWN arrow on
the omni selector to select
[Object Para.], then press the
MENU/ENTER key.
4
Setting analysis parameter.
•
Press the UP or DOWN arrow on
the omni selector to select an item
to change.
•
Press the LEFT or RIGHT arrow on
the omni selector to set the values.
5
After this operation, press the MENU/ENTER key to save
changes, or press the C key to go back to the upper menu
without saving.