NORD Drivesystems BU0570 - Manual (Page 30)

EtherCAT bus module for NORD frequency inverters SK 5xxE
30 Subject to technical amendments BU 0570 GB-0312
Parameter Setting value / Description / Note Device
Parameter
type
P176 … [-01]
…
…
[-27]
PZD bus IN
(Process data bus IN)
SK TU3-ECT 16 bit
Allocation of process data which have been received (data sent from PROFINET IO controller). -32768 ... 32767
[-01] = Bus module outputs
[-02] = Control word for FI1
[-03] = Setpoint 1 for FI1
[-04] = Setpoint 2 for FI1
[-05] = Bus module outputs
[-06] = Control word for FI1
[-07] = Setpoint 1 for FI1
[-08] = Setpoint 2 for FI1
P177 … [-01]
…
…
[-27]
PZD bus OUT
(Process data bus OUT)
SK TU3-ECT 16 bit
Allocation of process data which have been transmitted (data sent to the PROFINET IO
controller). -32768 ... 32767
[-01] = Bus module inputs
[-02] = Status word from FI1
[-03] = Actual value 1 from FI1
[-04] = Actual value 2 from FI1
[-05] = Bus module inputs
[-06] = Status word from FI1
[-07] = Actual value 1 from FI1
[-08] = Actual value 2 from FI1
5.1.4 BUS module information parameters, bus-specific (P18x)
Zugriff: Read only
Parameter Setting value / Description / Note Device
Parameter
type
P181
Second Address
(Second Address)
SK TU3-ECT 16 bit
0 ... 4095 Address set with the DIP switch.
P184
SPI error counter
(SPI error counter)
SK TU3-ECT 16 Bit
0 ... 0xFFFF Counts transmission errors between the ASIC and the SK TU3-ECT processor. This value is set
to 1 as default.