NORD Drivesystems BU0000 - Manual (Page 20)

NORD CON Manual
20 BU 0000 GB
Name of action Combination
of keys Description
Oscilloscope The action opens the „oscilloscope" of the selected device in the work
area. If the window was already opened, it is brought into the foreground.
PLC The action opens the PLC editor of the selected device in the work area. If
the window was already opened, it is brought into the foreground.
Bus scan Ctrl + F5 The action implements a network scan for the selected communication
module.
Note:
With a network scan, all devices are removed from the device list and all
device-specific windows are closed!
2.5 View "Messages"
The view contains a list of all „NORD CON" messages. The entries are displayed by default
time ascending. The sortation can be adjusted by clicking on a column header. Following filters
available are for the filtering:
Filter Ico
n Description
Error This filter is enabled, displays all errors. In addition, it shows the number of errors in the caption
of the button.
Warning This filter is enabled, all warnings are displayed. The number of warnings is displayed in the
caption of the button.
Informati
on This filter is enabled, all information will be displayed. The number of information is displayed in
the caption of the button.
System This filter is enabled, all messages of the "System" category are displayed.
Commun
ication This filter is enabled, all messages of the "Communications" category are displayed.
PLC This filter is enabled, all messages of the "PLC" category are displayed.
Macro This filter is enabled, displays all messages in the "Macro" category.
Paramet
er This filter is enabled, displays all messages in the "Parameter" category.
The messages can be saved or deleted via the popup menu (right mouse button). These
actions can be carried out via the main menu ("Extras/Messages").
Name of action Description
Delete The action deletes the list.