NORD Drivesystems BU0000 - Manual (Page 31)

Parameterization
31 BU 0000 GB
When a parameter has been selected, values of all parameter sets, if it can be set differently in
the sets, are displayed.
4.3 How to manipulate parameters
The selected parameter is read out and the value transferred to the 'Current Setting' box.
Management of the parameters of a frequency inverter is ensured by databases. These
databases can be stored, printed out or manipulated again at a later date.
Note
The menu "Parameterize" is indicated only if a parameter window were marked.
NORD CON features two ways of parameter manipulation:
Aktion Place Description
New File -> New -> Dataset The current database is re-initialized, in other words the
current and the new settings are deleted.
Open File -> Open Any database that was saved can be reopened.
Save File -> Save The current database is saved by the current name.
Save us... File -> Save us... The current database is saved with a new name.
Print preview... File -> Print preview... The current parameter settings are printed out.
Read all parameter or
Read all
Parameterize -> Read -> All
Parameter All of the parameters of the frequency inverter are read out
and entered into the database.
Read actual menu
group Parameterize -> Read ->
Actual menu group The parameters of the selected menu group are read out
and entered into the database.
Send new settings Parameterize -> Send -> new
Values All parameters for which a new value was entered in the
'New settings' box are transmitted to the frequency inverter.