NORD Drivesystems BU0000 - Manual (Page 21)

Graphic user interface
21 BU 0000 GB
Name of action Description
Save The action stores the entries into a file.
2.6 View "Remote"
The view "remote" contains all windows of the function „Remote". The view opens automatically
when opening the first window and closes after closing the latest. The view can be docked or
undocked like all views to the work area. If the view was closed by the user, it can be opened by
the action "Remote" again. The new windows are always docked to the left side of the last
window. With the help of the mouse, it can be undocked or docked again. If the view is opened
for the first time with the menu "View->Remote", each device in the list the window "Remote" is
opened automatically.
Note:
Windows of type "Remote" can be docked only into the view "Remote".
2.7 Docking and Undocking
With the new design of NORD CON , the user has the possibility to adapt the layout of the
surface to their own requirements. In principle, you can undock each view and editor window
and position them freely on the screen. For this, the user must press the left mouse button over
the title border and pull the colored rectangle to the desired position. After releasing the mouse
button, the view or editor windows remains in those positions as independent windows. With
the editor windows, there is additionally the possibility - with the popup menu, which opens
when clicking with the right mouse button on the title border, to undock the windows. The
docking functions are similar to the undocking functions. The colored rectangle indicates in
each case the current docking position.
Type of window Rule
View of main window(e.g. Project, Logs,
Remote) The views of the main window can be docked only to the left, right
and/or lower edge of the work area. Within these windows, there are
no rules and the user can select the position freely.
Editor window (e.g. Macro editor, Parameter
window, Oscilloscope) The editor windows can only be docked into the work area. The
adjustment is fixed however on down and/or above, or as register
map.
Views of the Macro editor The views of the macro editor can be docked only to the macro
window. The adjustment here is fixed on left, right or down. Within