NORD Drivesystems BU0000 - Manual (Page 49)

Oscilloscope
49 BU 0000 GB
7.3 Handling
Follow the next steps to execute a measurement:
1. Choise of channels
There is a popup menu to make the choice of the 4 channels. There is a color referring to each
channel. Each channel can be switched on and off by checkbox's. The resolution and offset can
be chosen for each channel separately. Displaying the results of measurement the values of
the vertical axis of each channel can be chosen and indicated.
Importance of measure value
Mesure value Description
(=P[Number]) [Name] The value of this measuring function is updated in the time slot pattern by approx.
100 ms and corresponds to the value indicated of the parameter.
[Name] The value of this measuring function is updated in a time slot pattern by approx.
100 ms.
(
˜
P[Number]) [Name]
The value of this measuring function is updated in a time slot pattern by approx.
50 ms.
(~P[Number]) [Name] The value of this measuring function is updated in a time slot pattern of approx.
250 µs.
2. Setting of trigger