NORD Drivesystems BU0000 - Manual (Page 36)

NORD CON Manual
36 BU 0000 GB
Now the control configuration of the inverter is read and checked with the standard setting
(setting/control/control configuration check). If the "control" of inverter limited or impossible there
will be a warning note on the screen.
In the window „Control" there are two versions available:
Standard
C
o
n
t
r
o
l
:
The frequency inverter can be released and the setting value can be
increased or decreased. Direction change and error acknowledge is
possible, too.
Detailed Control
:
Mit diesem Fenster können sämtliche Steuerungsmöglichkeiten
ausgenutzt werden.
5.2 Standard control
Using the Standard Control the following functions are available:
Enable of the frequency inverter