NORD Drivesystems BU0000 - Manual (Page 28)

NORD CON Manual
28 BU 0000 GB
Attention:
All changes are only available if the user push the button "apply". With the button "Restore" then
user can undo all changes.
3.2.2 Bus scan
Baud rate
In the selection box, the user can choose the communication speed of the serial interface. The
same value must be chosen on the frequency inverter. When using multiple frequency
inverters, the setting must be identical on all connected devices. The Baud rates over 115200
Bit/s are user specific Baud rates and not by all devices are supported.
Attention
Older serial PC interfaces are sometimes not able to justify the accurate user specific Baud
rate. From this reason no connection can be made to the device.
Bus-Scan with all baud rates
With the action, the user activates or deactivates the bus scan with all baud rates. If the baud
rate of the connected device is unknown, the search with all baud rates can find the right one to
start communication.
Starting baud rate
In the selection box, the user can define the baud rate for start of the baud rate search.