Brother NX 600 - Manual (Page 112)

UTILITY STITCHES
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
106
h
Press (Reverse/reinforcement stitch
button).
Hold the reverse/reinforcement stitch button
pressed until the stitching reaches the upper-left
corner.
X The fabric is fed forward.
i
After you have sewn to the corner, stop the
sewing machine, and then select stitch
69
.
j
Start sewing.
X The fabric is fed to the left.
k
After you have sewn to the corner, stop the
sewing machine, and then select stitch
1
again.
l
After sewing 3 to 5 stitches at the beginning of
the stitching, stop the sewing machine.
Memo
z The feeding direction of the fabric differs
depending on the stitch that is selected. Be
sure to guide the fabric while it is sewn.
F3dash-BrotherE_sgml.book Page 106 Friday, September 5, 2003 5:46 PM