Brother NX 600 - Manual (Page 49)

Sewing Cylindrical or Large Pieces 43
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
d
Turn the screw at the bottom of the legs to
adjust their height.
CAUTION
e
When you are finished using the wide table,
remove it.
While slightly lifting up the wide table, pull it
off to the left.
f
Install the flat bed attachment back in its
original position.
Memo
z With the legs folded up, the wide table can
be stored attached to the hard case.
z The knee lifter can be stored attached to the
bottom of the wide table.
● Do not move the sewing machine while
the wide table is attached, otherwise
damage or injuries may occur.
F3dash-BrotherE_sgml.book Page 43 Friday, September 5, 2003 5:46 PM