Brother NX 600 - Manual (Page 8)

2
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Introduction
Thank you for purchasing this sewing machine. Before using this sewing machine, carefully read the
"Important Safety Instructions" (page 6), and then study this manual for the correct operation of the various
functions. In addition, after you have finished reading this manual, store it where it can quickly be
accessed for future reference.
Sewing Machine Features
a Easy upper threading
Since the spool can be installed at the front of the sewing machine, the upper thread can easily be threaded. In addition,
the needle can be threaded with a simple operation. (page 24)
b Full auto upper thread tension
The thread tension is adjusted automatically.
c Automatic thread-cutting
The sewing machine can be set to automatically cut the thread at the end of the stitching. (page 58)
d One-touch lower threading
You can start sewing without pulling up the bobbin thread. (page 22)
e Simple bobbin-winding
The bobbin can quickly and easily be wound with thread. (page 18)
f Built-in stitches
You can select from the built-in stitches available, including utility stitches, character stitches and decorative stitches.
Twelve of the most often used utility stitches can quickly be selected with the stitch keys. (page 66)
g Knee lifter
Use the knee lifter to raise and lower the presser foot with your knee, leaving both hands free to handle the fabric. (page
61)
1 5
3
2
4
7
6
F3dash-BrotherE_sgml.book Page 2 Friday, September 5, 2003 5:46 PM