Brother NX 600 - Manual (Page 97)

Sewing Stretch Fabrics and Elastic Tape 91
3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
b
Attach zigzag foot "J".
• For details, refer to "Replacing the presser
foot" (page 37).
c
Select a stitch.
• For details, refer to "Selecting stitching" (page
66).
d
Sew the elastic tape to the fabric while
stretching the tape so that it is the same length
as the fabric.
While pulling the fabric behind the presser foot
with your left hand, pull the fabric at the pin
nearest the front of the presser foot with your
right hand.
CAUTION
● When sewing, be sure that the needle
does not touch any pins, otherwise the
needle may bend or break.
J
F3dash-BrotherE_sgml.book Page 91 Friday, September 5, 2003 5:46 PM