Brother NX 600 - Manual (Page 125)

Sewing the Various Built-In Decorative Patterns 119
3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Changing the pattern size
The size of decorative stitches, decorative satin
stitches, and character stitches in the Gothic font and
outline style can be switched between large and
small. However, the size of other patterns cannot be
changed.
a
Select a stitch.
Select one of the decorative stitches, decorative
satin stitches, or character stitches in either the
Gothic font or the outline style.
b
Press (Settings key) in the operation panel.
X The settings screen appears.
c
Press , , and (Arrow keys) until
is selected.
d
Press (OK key).
X The screen for changing the pattern size
appears.
e
Press and until the desired size is
selected.
Select
for the small size or select for the
large size.
X The pattern size is changed.
f
Press (OK key).
X The initial stitch screen appears again.
Memo
z The large pattern size is the default. If the
small pattern size is selected, small patterns
can be combined and connected.
z If multiple patterns have been combined, the
size of each selected pattern can be
specified.
F3dash-BrotherE_sgml.book Page 119 Friday, September 5, 2003 5:46 PM