Brother NX 600 - Manual (Page 66)

SEWING BASICS
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
60
Saving stitch settings
Adjusted thread tension and stitch width and length
settings can be saved so that they will be specified
each time the stitch is selected. The various settings
can be saved for each utility stitch.
a
Select the stitch, and then adjust the thread
tension and stitch width and length.
To adjust the stitch width, press
(–) and
(+). To adjust the stitch length, press (–) and
(+).
• For details on selecting a stitch, refer to
"Selecting stitching" (page 66).
• For details on changing the thread tension,
refer to "Changing the tension of the upper
thread" (page 54).
X The thread tension and stitch width and
length are changed.
b
Press (Settings key) in the operation panel.
X The settings screen appears.
c
Press , , and (Arrow keys) until
is selected.
d
Press (OK key).
X The screen for saving the settings appears.
e
Check that the is selected, and then press
(OK key).
X The settings for the stitch width and length
are saved.
• The next time that the stitch is selected, the
saved settings are the first ones that are
displayed.
• To clear the saved settings and return the
thread tension and stitch width and length to
their default settings, press so that is
selected
, and then press (OK key).
F3dash-BrotherE_sgml.book Page 60 Friday, September 5, 2003 5:46 PM