Alps Electric MD-1300 - Manual (Page 101)

99
Printing on Photo Realistic Labels
Step 1
❿ ❿ ❿ ❿ ❿
Prepare the Image to Be Printed
Use any suitable application to lay out photographs or pictures in
order to create the necessary print data.
Photographic-Quality Label templates have been prepared in the
Label folder of the ALPS Installation CD-ROM included in the pack-
age. When creating data using those templates, please see the
section “How to Use Photo Label Templates” in the “Read Me” file
on the ALPS Installation CD-ROM for instructions. You may use
them, or employ some other application to lay out the data ac-
cording to the print format shown below.
Step 2
❿ ❿ ❿ ❿ ❿
Install the Ink Cartridges
Install one cyan, one magenta, and one yellow ink cartridge, and
one Finish cartridge in the ink cartridge holders. The cartridges
may be installed in any order.
For details, see Chapter 1, "Installing Ink Cartridges".
Step 3
❿ ❿ ❿ ❿ ❿
Load Paper
Use manual feed mode.
1. Set the paper feed switch to position "M".
2. Adjust the paper feed guide to the width of the paper plus
several millimeters.
3. Load one sheet of the Photo Realistic Labels into the sheet
feeder and press the
ready / insert button.
ready / insert