Alps Electric MD-1300 - Manual (Page 17)

15
Name and Function of Each Part of the Printer
This section explains the name and function of each part of the printer.
Printer (Front View)
Sheet feeder
Paper is fed either automatically or manually.
Place a stack of not more than 100 sheets (plain
laser paper) for automatic feed. In manual feed,
insert a single sheet at a time.
Front cover release button
Opens the front cover. The front cover is opened
when there is a paper jam or when changing ink
cartridges. Open the front cover gently, using both
hands.
Front cover
This cover protects the internal mechanisms of the
printer. This cover is closed during printing.
Paper output slot
Paper exits the printer through this slot.
Caution
Never reach into the printer while it is operating. Injury may
result.
Do not open the front cover while the printer is running.
Paper stopper
When Photo Realistic Paper (4" x 6" / 100 x 148
mm) is set vertically for printing, this stopper
prevents the paper from rising.
Paper support
The paper support provides support to hold
loaded paper upright. To extend the paper
support, pull up on the top edge.
Paper feed guide
This guide feeds the paper into the printer.
Set the guide to match the paper size being used.
Caution
Never reach into the sheet feeder.
By doing so, you might get injured, or the printer might malfunc-
tion.
Name and Function of Each Part of the Printer