Alps Electric MD-1300 - Manual (Page 94)

Chapter 2 - Various Printing Operations
92
Step 2
❿ ❿ ❿ ❿ ❿
Install the Ink Cartridges
You can print in full color plus two spot colors without having to
change cartridges by using the multicolor ink cartridge, the black
ink cartridge, and two spot color ink cartridges of your choice. You
can also print your data with up to four spot colors by changing
the ink cartridges when the message dialog appears.
Note
The multicolor and black ink cartridges must always be loaded
during simultaneous full color + spot color printing.
Step 3
❿ ❿ ❿ ❿ ❿
Load Paper in Your Printer
The method used for loading paper depends on the paper type.
Use manual feed mode for thick paper and greeting cards. For
plain paper, laser paper, and High Grade Paper, you may also
use automatic feed mode to print a number of sheets at one time.
For details, see the section entitled "Loading Paper" in Chapter 1.
1. For manual feed mode, set the paper feed switch to posi-
tion "M"; for automatic feed mode, set it to "A".
Paper feed switch “A” Paper feed switch “M”
2. For Letter / A4 paper, fully extend the paper support.
3. Adjust the paper feed guide to the width of the paper.