Alps Electric MD-1300 - Manual (Page 66)

Chapter 2 - Various Printing Operations
64
Step 2
❿ ❿ ❿ ❿ ❿
Install the Ink Cartridges
Install one cyan, one magenta, and one yellow ink cartridge, and
one Finish cartridge in the ink cartridge holders. The cartridges
may be installed in any order.
Step 3
❿ ❿ ❿ ❿ ❿
Load Paper
Manual feed mode is used for this printing.
1. Set the paper feed switch to position "M".
2. For Photo Realistic Paper (Letter / A4 size) or laser paper,
fully extend the paper support.
3. Adjust the paper feed guide to the width of the paper plus
several millimeters.
4. Load one sheet of paper in the sheet feeder, and press the
ready/insert button.
ready / insert
Note
•
Be sure to manually feed Photo Realistic Paper and Labels
one at a time.
•
For Photo Realistic Paper and Labels, load so that the glossy
surface faces upward.
•
Provide a gap of several millimeters between the paper feed
guide and Photo Realistic Paper and Labels. Otherwise, pa-
per may not feed correctly.
•
Laser paper and High Grade Paper can be continuously
printed using automatic feeding. To do so, load the paper by
placing the paper feed switch in position "A".