Alps Electric MD-1300 - Manual (Page 126)

Chapter 2 - Various Printing Operations
124
Step 5
❿ ❿ ❿ ❿ ❿
Print
Click OK in the Print dialog box to start printing. If printing is ex-
ecuted in overlay mode, paper will not be ejected even when print-
ing is finished.
Note
If Overlay mode is not being used, manually load paper into the
sheet feeder and print in full color after executing the undercoat
printing. If consecutive printing is carried out using automatic
feeding, the paper may not feed in correctly.
Step 6
❿ ❿ ❿ ❿ ❿
Print on the Undercoat
Once the undercoat printing has been finished, replace the ink
cartridges, and start full color printing.