Alps Electric MD-1300 - Manual (Page 148)

146
Appendix
Troubleshooting
What to Do If the Power Is Shut Off While Printing
(due to power failure, disconnected power cord, etc.)
With the front cover closed, turn the printer on. The printer will initialize and eject
the partially printed page.
When the front cover has been opened before the printer is turned back on,
perform the following steps.
1. If a cartridge is on the carriage, press on the middle of the
cartridge, as shown in the diagram, to ensure it is prop-
erly seated. Also, check that the cartridges in the holders
are correctly installed. (See “Installing Ink Cartridges” in
Chapter 1.
A
2. Close the front cover.
The printer will now be able to resume functioning.
Carriage
Ink Cartridge