Canon XEED SX6000 - Manual (Page 119)

119
Selecting an Image Quality
User’s Manual
Settin
g
Functions from Menus
Reducing the Lamp
Brightness
[Lamp mode]
Reducing the lamp brightness reduces
power consumption and cooling fan noise.
For the WUX4000, you can also enable or
disable this mode with the LAMP button on
the remote control.
MENU > [Image adjustment] > [Lamp mode]
Press the OK button to accept your setting
and then press the MENU button.
• [Normal] is the factory default.
• The adjustment you have made is stored
as adjusted values for the input signals
and image mode of the current projection.
Resetting the Image
Adjustment Settings
[Reset]
You can reset the current image adjust-
ment settings to the default settings. If
reset is performed when user setting 1 - 5
is selected for [Image mode], the settings
are returned to the settings that were
saved in [User setting 1 - 5].
MENU > [Image adjustment] > [Reset]
• Only the setting for the combination of
input signal and image mode for the cur-
rent projection is reset.
HDMI Component
Digital PC Analog PC
Normal Projects an image at the normal
brightness level.
Quiet Reduces the lamp brightness and
cooling fan noise.
HDMI Component
Digital PC Analog PC
OK Resets the image adjustment set-
tings.
Cancel Cancels resetting of the image
adjustment settings.