Mail authentication settings [mail auth, Setting up the network – Canon XEED SX6000 User Manual
Page 184
Setting Up the Network
184
■Mail Authentication Settings [Mail auth]
From [Mail auth] in the settings window, you can configure the settings for authentica-
tion of mail that is sent when an error occurs. For the setting procedure, refer to
Item
Explanation
Factory default set-
ting
Mail authentication
Select the mail authentication method.
If OFF is selected, the other mail
authentication settings cannot be
changed.
OFF
User name
Enter the user name to use for mail
authentication in 1-byte alphanu-
meric characters and symbols (1 - 63
characters).
<Blank>
Password
Enter the password for mail authenti-
cation in 1-byte alphanumeric charac-
ters and symbols (1 - 63 characters).
<Blank>
Confirm password
For confirmation, enter the same
password as you entered in [Pass-
word].
<Blank>
POP3 server IP address
Enter the POP3 server IP address in
1-byte numbers.
0.0.0.0
POP3 server port number
Enter the POP3 server port number in
1-byte numbers (1 - 65535).
110
POP before SMTP response time
Enter the wait time from POP3 authen-
tication to SMTP authentication (units:
milliseconds) using 1-byte numbers
(0 - 9999 milliseconds).
300