Lamp warning display, Resetting the lamp counter, Setting various functions – Canon XEED SX6000 User Manual

Page 135: User’s manual settin g functions from menus

Advertising
background image

135

Setting Various Functions

User’s Manual

Settin

g

Functions from Menus

Lamp Warning Display

[Lamp warning display]

A message that advises you to change the
lamp can be set to display when the lamp
has been used for the specified period of
time.

MENU > [Install settings] > [On screen] > [Lamp
warning display]

Press the

OK button to accept your setting

and then press the

MENU button or EXIT

button (WX6000 / SX6000).

• The factory default is [On].
• Regardless of the [Lamp warning display]

setting, when the lamp replacement time has
been reached, the LAMP indicator on the
projector will flash.

Resetting the Lamp
Counter

[Lamp counter]

You can reset the lamp counter that indi-
cates the time for lamp replacement.

MENU > [System settings] > [Other settings] >
[Lamp counter]

MENU > [System settings] > [Other settings] >
[Lamp counter]

HDMI

Component

Digital PC

Analog PC

Off

The lamp warning display is not
displayed.

On

The prepare lamp message and
the lamp warning display are dis-
played.

HDMI

Component

Digital PC

Analog PC

Do not reset the lamp counter except
when you have replaced the lamp.
Otherwise, the lamp counter cannot
indicate the correct timing for replac-
ing the lamp.
For details of lamp replacement, refer
to

page 195

.

Advertising