Windows vista – Canon XEED SX6000 User Manual

Page 168

Advertising
background image

Preparing the Remote Control

168

Windows Vista

1

From the PC [Start] menu, select [Control Panel].

2

Click on [View network status and tasks].

3

From the menu on the left side of the window, click on [Manage network connections].

4

Right-click [Local Area Connection], and open [Properties].

5

Select [Internet Protocol Version 4 (TCP/IP)] and click the [Properties] button. Make a
note of the original network settings (IP address, subnet mask, default gateway, etc).

6

Select [Use the following IP address] and set the IP address and subnet mask.
The factory default IP address for the projector is “192.168.254.254”. Set an IP
address which is different from this.

Example
IP address:192.168.254.1
Subnet mask: 255.255.255.0

7

When the settings are completed, click the [OK] button and then click the [OK] button
on the [Local Area Connection Properties] window to close it.

Advertising